Industrial fan parts for air cooled heat exchangers, air cooled condensers and cooling towers. Not HVAC or household fans.
Don't replace fans, upgrade them. Oil and gas and industrial fan optimization. BC Hydro retrofit funding. We do zero new construction.Fan blades, hubs, shrouds, belts and drives, replacement and obsolete blades included. Tell us what you're running and we'll call you back with the right parts, available and shipped to your site.
An immediate improvement in motor amp draw
The first of four new AFI fans.
“Fans are great to work on… Easy to pitch. Operations noted that the amp draw on the motor was an immediate improvement.”
Outlet gas 20 to 24°C cooler
Belt drive upgrade, installed by our field crew.
“We have seen an outlet gas temp reduction of somewhere between 20-24 C lower than it was previous to this upgrade work being conducted.”
Enough extra cooling to lock out more fans for the rebuild
After only 4 of 22 fans were upgraded, operations reported enough added cooling capacity to lock out more than one fan at a time for the rest of the rebuild.
“You guys have showed a great level of skill and professionalism to get this task completed… Thank you nick for all your help and support with resolving all the theoretical and technical questions.”
“I truly appreciate the support you've both provided. Your assistance has been invaluable.”
“Thank you for all the support… getting our Phoenix fans sorted out leading into the outage. You've been a tremendous ally over the years.”
“I wanted to reach out and let you know how happy I was with your team and the support they provided for us last week. I was impressed with how efficient and professional the guys were and will definitely be recommending your support in the future.”
“I have nothing bad to say only good, Russell and Bryce have helped plenty when we need a quick answer or helping by coming out and going through the existing fans for the upgrades to make sure we get everything correct for the job.”
“Please pass on a 'Thank you, and Job well done!' to Mariusz and all the crew that executed another successful upgrade.”
“Thanks Nick! Been great working with you over the Years and look forward working with you in the future.”
We supply parts for all of these. Some we stock, some we source. Tell us what you've got and we'll tell you which.
Fan-Div is independent and isn't affiliated with or endorsed by these manufacturers.
Hudson fan blades, hubs and seal discs for air coolers, including replacement blades for Tuf-Lite® fans and obsolete blades that are no longer made. Send us what you're running and we'll match parts to your duty. Parts for Fin-Fan® coolers too. Hudson Tuf-Lite parts by series.
Moore fan blades, hubs and drive parts, matched to your duty. Blade and hub replacements, and the belts, sheaves and bearings behind them. Moore parts by class.
Multi-Wing blades and complete fan assemblies, matched to your duty. Replacement blades for the hub you have, or a whole fan when the old one has had its day. Multi-Wing parts by family.
Howden axial fans and replacement parts, matched to your duty. Blades, hubs and the drive parts around them. Howden parts by series.
Cofimco axial fans and replacement blades, matched to your duty. A single blade, a set, or the fan. Cofimco parts by series.
Fan and drive parts for Air-X-Changers coolers, matched to your duty. Blades, hubs, belts, sheaves and bearings. Air-X-Changers parts by model.
BAC cooling tower fans, fan blades, drives and motors. Parts for the fan and the drive train that turns it. BAC parts by model.
Evapco cooling tower and evaporative condenser fans and parts. Fan blades, hubs and the drive parts behind them. Evapco parts by series.
Marley cooling tower fans, drive shafts and gearboxes. Fan blades and hubs too, matched to your tower. Marley parts by component.
We supply Axial Fans International (AFI) axial fans and spare parts, matched to your duty. Fans from 3 ft to 40 ft, including low noise models, and replacement blades and parts for AFI fans already in service. AFI fans by series.
We supply Aerovent impellers and parts, and we replace and upgrade Aerovent fans already in service. AHX adjustable pitch impellers from 54 to 144 in, and the smaller AHX-E. Aerovent AHX impellers.
We supply fan and drive parts for AXH and Airflo coolers: blades, hubs, belts, sheaves and bearings, matched to your cooler. AXH and Airflo parts by model.
For process plant air coolers, cooling towers, radiators and compressor coolers. We don't supply agricultural, HVAC or household fans.
Single blades or full sets, including obsolete blades that are no longer made.
Tell us the fan diameter, blade count and hub, and we'll find what fits.
Worn or cracked hubs, a new hub for a blade change, and the seal discs that go with them.
For air cooler, condenser and cooling tower fans.
Replacement fan rings and shrouds. A ring that has gone out of round opens up the tip gap, and that is airflow you paid for going nowhere.
The E-Bell™ inlet bell where it fits.
Cooling tower fans and fan blades, and the drive train behind them: gearboxes, drive shafts, motors and belts.
For BAC, Evapco, Marley and other towers.
From a single blade to a complete fan assembly, for air coolers, condensers and cooling towers.
Matched to your duty, or engineered when a straight swap isn't the answer.
When a straight swap isn't the answer, the fan gets engineered. Nick Agius, who designed and patented the DG-II Anti-Rotation Device®, has 48 years on air cooler fans. Russell De Jesus, P.Eng, works the re-rate and the drive side. Ask to talk to a P.Eng and you will.
Stocked in Edmonton, Alberta. We ship across Canada and into the US, including LNG and refining sites on the Gulf Coast.
US inquiries are handled by Bryce Harper, VP of Business Development and Technical Services. Send the form below or call 1-877-FAN-DIV-1877-326-3481.
Fan-Div, based in Calgary and Edmonton, supplies Hudson fan blades, hubs and seal discs, including replacement blades for Tuf-Lite® fans and obsolete blades that are no longer made. Some parts we stock, some we source, and we ship across Canada and into the US.
Fan-Div supplies cooling tower fans, fan blades, gearboxes, drive shafts and motors for BAC, Evapco, Marley and other towers, from Edmonton, Alberta. Tell us what you're running and we'll call you back with the right parts.
Whatever you know about the fan: brand, fan diameter, blade count, hub type, and motor horsepower and speed. If you're not sure, give us a call and we'll work it out with you.
No. We supply parts for all of these brands. Some we stock, some we source. Tell us what you've got and we'll tell you which, and how long it takes.
Yes. Parts are stocked in Edmonton, Alberta and ship across Canada and into the US, including LNG and refining sites on the Gulf Coast.
No. Fan-Div is independent and isn't affiliated with or endorsed by any of the manufacturers named here. We supply parts that fit their equipment.
All trademarks are the property of their respective owners.
